Marine PROTOCOL – 4 Outboard Coat
Marine Outboard Coat is a state-of-the-art protection set for marine outboard that combines the latest advances in graphene technology into the most durable outboard protection on the market.
Marine Outboard Coat is a state-of-the-art protection set for marine outboard that combines the latest advances in graphene technology into the most durable outboard protection on the market. Innovative nano hybrid graphene protection creates a strongly connected few microns thick protection on the surface. Advanced hybrid technology has the ability to network larger sequential layers, which offers even longer-lasting and more resistant protection
Marine Outboard Coat offers long-term and strong protection of painted surfaces of outboard against corrosion, rust, micro-scratches, abrasion and it provides chemical and UV resistance. It creates smooth surface with water repellent effect, which prevent water retention and adhesion of dirt, barnacles, marine vegetation and various pollutants on outboard coat. This increases engine power and reduces fuel consumption. UV protection and chemical resistance of the protective coating preserve the original appearance and prevent corrosion. The coating is very resistant to overheating, as it can withstand heat up to 500°C.
The surface becomes easy-to-clean, which reduces the cleaning time and the need for aggressive cleaners that could damage the outboard. The product is water-based and environmentally friendly, so it will not harm the marine life.
Use of product
Marine Outboard Coat is used to protect the external surfaces of outboard motors.
Product benefits
- strong protection against corrosion and rust,
- reduced ability to adhere dirt and grow algae and other organisms,
- more power and fuel savings,
- less maintenance cost,
- strong resistance to chemicals and UV,
- temperature resistant up to 500 C,
- easy and fast application,
- long durability (up to 4 years),
- smooth surface and easy 2 clean effect,
- environmentally friendly and water based.
| EAN | 5902643847125 |
|---|---|
| Composition | 1-Ethylure<10%, DMSO<10%, Silane mixture<20%, Siloxane mixture<25%. |
| Dilutions | Product is ready for use. |
| Safety instructions | P102 – Keep out of reach of children. |
| Storage | Do not store the container on direct sunlight. Store at a temperature between 3°C and 40°C. |
| Packaging | 30ml bottle |
Instructions
In order to achieve maximum efficiency and durability of the outboard protection, it is necessary to follow the application instructions carefully. The application procedure is as follows:
- Make sure the surface is degreased, cleaned of salt, metal particles and other dirt
- Apply 5-6 drops of Outboard Coat on clean microfiber cloth and spread evenly over the surface (30x30cm).
- Wait 30 seconds and wipe dry with a clean, dry microfiber cloth.
- Repeat step 2. and 3. until entire surface is protected.
- Protect from water and mechanical stress for 24h. After 48 hours, the protective coating is completely cured.
Marine Outboard Coat (.pdf)Be the first to review “Marine PROTOCOL – 4 Outboard Coat”
Related products
Car PROTOCOL
Automotive
Reviews
There are no reviews yet.